Smile, Smart, Speed

고객의 만족을 위하여 최선을 다하는 기업, 정문사이언스입니다.

공정장비

HomeHOME > 회사소개 >공정장비

Programmable dip coating manchine with vertical tube furnace

모델명 :
제품 견적문의

상품상세정보

Programmable dip coating manchine with vertical tube furnace is widely used in various high temperature lifting coating research. The sample is fixed under the drawing and runs down to the charging box under the tube to stay in the liquid film material for a certain time. Then, it is pulled back into the tube furnace  for heating to cure the film quickly. The heating tube furnace  can provide a lift coating environment with a temperature of up to 1000 °C. The coating machine is especially suitable for materials for film growth at high temperatures, such as ceramic films, crystal films, battery materials films, and special nano films. The coating machine can adapt to the development needs of film forming technology under high temperature conditions in the future. The machine is easy to operate and easy to clean. 

 

Programmable dip coating manchine with vertical tube furnace specifications:

Dip coater

•Working Voltage: 110V AC (or 220V)

•Max. Power Consumption: 50W

•6"(L)×4"(W) Touch Screen Display

•Three stages pulling speed control

•Total stoke length: 620mm

•Pulling Speed: 1-200 mm/min programmable with accuracy of +/-   0.05%

•Dwelling time at constant temperature zone: 1-999 seconds

•Lower or higher pulling or dipping speed is available upon request   at extra cost

Tube furnaces

•Working Voltage: 110V AC or 220V

•Max. Power Consumption: 2KW

•Tube size: 2" (OD)×24"(L)

•Heating Zone Length: 12" (300mm)

•Max. heating temperature: 1200℃

•Continuous working temperature: 1100℃

•30 segment progtammable digital temperature controller

•Note: Max. working temperature for dip coating is limited by   pulling wire

   Included stainless steel wire  Max. working temperature < 800℃

   Ni-Cr-Al wire (not included) Max. working   temperature < 1100°C

   Platinium wire (not included) Max.working   temperature1200℃, 1600℃

800℃pulling wire (Ni-SS)

Three sets of Ni-SS pulling wire are included. Max. working   temperature is 800℃.

Optional pulling wire for higher working temperature:

   Ni-Cr-Al wire  max. working temperature: 1100℃

   Platinium wire  max.working temperature: 1200 - 1600℃

Stage Length

Lower Stage(Pre-heat zone): 236mm

Center Stage(Constant temperature zone): 150mm

Upper Stage(Cooling zone): 234mm

Product Dimensions

560mm(L)×470mm(W)×1435mm(H)

Compliance

CE Certified

Net Weight

105 kg (230 lbs)

Shipping Weight

137 kg (300 lbs)

Shipping Dimensions

48"(L)×45"(W)×70"(H)