Smile, Smart, Speed

고객의 만족을 위하여 최선을 다하는 기업, 정문사이언스입니다.

공정장비

HomeHOME > 회사소개 >공정장비

Double side R2R coating equipment for battery electrodes

모델명 :
제품 견적문의

상품상세정보

Double side R2R coating equipment is applied to the coating of materials such as nickel batteries and super capacitors. The equipment adopts dip-coating slurry, scraper metering, and continuous double-sided coating of the substrate at one time.

Double side R2R coating equipment for battery electrodes specifications:

Working Voltage

208 - 240 V AC, 50/60Hz, Single Phase

Max. Power Consumption

3 KW ( 20A Air breaker   required )

Coating Method

Coating   Thickness Precison: +/-  0.003mm               

Max. Coating Width

250mm

Thickness adjustable   range

0- 5mm

Coating thickness (after   drying)

30 - 200um (for most   kinds of battery electrode coating material)
  Note: The dried coating thickness results vary depending on the physical   property of the coating material.

Thickness Precision

± 3 µm 

Coating Speed

0-750 mm / minute 

Max.   Drying Temperature

150°C 

Temperature Accuracy

±1°C

Heating Zone Length

710mm (28")

Reeling/Unreeling Shaft

75mm (ID)

Max. Reeling/Unreeling   Diameter

250mm (OD)

Max. Coating Length

1)Depending on the coating and substrate thickness.

2)Typically, 10um thick foil with 100um coating can get 600   meters of electrode length coated per run.

Exhaust Port Size

127mm O.D

Compressed Air

0.5-0.8 MPa (Air   compressor not included. )

Product Dimensions

L1100mm×W1200mm×H1800mm

Net Weight

1000 kg (2200 lbs)

Warranty

1)One Year limited warranty with lifetime support.

2)Rusting and damage due to improper storage condition or   maintenance are not covered by warranty.