Smile, Smart, Speed
고객의 만족을 위하여 최선을 다하는 기업, 정문사이언스입니다.
KOR
공정장비
HOME > 회사소개 >공정장비 
double sided dip coating experimental coater with lithium battery
상품상세정보
Double-sided dip coating experimental
coater is a coating machine using dip coating process, which can use wire rod
to measure the coating. Can be low tension rewinding coil, equipped with
infrared heating drying box and process correction device, optional static
eliminator and dipping box type. The equipment has the advantages of simple
structure, convenient operation, high production efficiency and wide
application range. It can be used in lithium-ion battery, graphene film,
ceramic film, high-end tape and various functional film industries.
Functional features
Continuous dip coating on both sides.
Line rod metering to control coating
thickness and evenness.
Infrared drying oven with adjustable
temperature and air volume.
Stripper stability, low tension
stripper can be achieved.
Active flattening roller guide with
adjustable speed.
Peristaltic pump feeds automatically.
Configuration deviation
correction function, high precision walking.
Dip boxes available in a variety of
options.
PLC control, HMI operation, easy to
use;
|
Technical
parameters |
||
|
Electrical Source |
Single-phase AC220V±10%,
frequency 50Hz, power 3KW |
|
|
Air Supply |
0.5-0.8MPa compressed air |
|
|
Coating method |
Dip coating |
|
|
Coating type |
Continuous coating |
|
|
Retract and deflate
the coil diameter |
Max: 300mm |
|
|
Guide roll width |
300mm |
|
|
Mechanical speed |
Max: 1m/min |
|
|
Coating accuracy |
±3μm (negative
slurry, viscosity 1000CP, solid
content 35.5%, line rod specification
80μm). |
|
|
Coating thickness |
Wet film thickness
6 -200μm (reference value, wire
rod coating), related to slurry
parameters and wire rod model. The thickness of the
covering foil can be
adjusted between 0.1m- 1mm |
|
|
Rod specification |
Diameter 10mm,
effective length 300mm; 6μm, 8μm,
10μm, 12μm,15μm, 20μm, 25μm,
30μm, 40μm, 50μm, 60μm,70μm, 80μm, 100μm,
120μm, 150μm, 200μm The above are
wet film thickness parameters,
related to paint parameters, for
reference only |
|
|
Infrared drying oven |
Way |
Carbon fiber infrared
lamp heating |
|
Air volume |
Max: 402m3/h, air
valve regulation |
|
|
Temperature |
Max: 150 ° C |
|
|
Power |
2KW |
|
|
Length |
500mm |
|
|
Size of tension |
6-60N |
|
|
Accuracy of deviation correction |
+ / - 0.5 mm |
|
|
Dipping box |
Standard |
Minimum coating
capacity Min: 0.3L |
|
Optional 1 |
Minimum capacity Min:
0.7L when coating, reserve
cooling water interface |
|
|
Optional two |
Minimum capacity Min:
2.7L when coating, reserve
cooling water interface |
|
|
Equipment size |
L980mm*W750mm*H1420mm |
|
|
Heavy weight |
About 540kg |
|
TEL : 02-565-7077 FAX : 02-563-7033 E-mail : jungmun@jungmun-science.co.kr
ⓒ 정문사이언스. All Rights Reserved. Designed by Website.co.kr
