Smile, Smart, Speed

고객의 만족을 위하여 최선을 다하는 기업, 정문사이언스입니다.

공정장비

HomeHOME > 회사소개 >공정장비

Roll to Roll Transfer Coating System with Drying Oven For Battery Electrodes

모델명 :
제품 견적문의

상품상세정보

Roll to Roll transfer coating system is a automatic battery electrode coating system with a compact footprint that is less than 6'x3'. It uses transfer coating technique for better coating uniformity and is perfect for research or building prototypes (e.g. pilot scale studies) of new generation rechargeable batteries.

Roll to Roll Transfer Coating System with Drying Oven For Battery Electrodes specifications:

Working Voltage

208 - 240 V AC, 50/60Hz, Single Phase

Max. Power Consumption

4 KW ( 30A Air breaker required )

Max. Coating Width

250mm

Thickness adjustable   range

0-5mm

Coating thickness (after   drying)

30-200um (for most kinds of battery electrode coating material)
Note: The dried coating thickness results vary depending on the physical   property of the coating material.

Thickness Precision

± 3µm (± 5µm at edges)

Coating Speed

0-750 mm / minute 

Max.   Drying Temperature 

120°C
 ( Using a 240V transformer,  can reach 150°C max.)

Temperature Accuracy

±1°C

Heating Zone Length

710mm (28")

Reeling/Unreeling Shaft

75mm (ID)

Max. Reeling/Unreeling   Diameter

250mm (OD)

Max. Coating Length
 
 

l  Depending on the coating and substrate thickness.

l  Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run

Coating Modes

1.Using transfer coating technique ( Reverse comma ) for better uniformity

2.Two available coating modes selectable on the control panel.

l Continuous mode 

l  Intermittent coating ( system performs coating, stops,   coats again and so on. The length of the coating and break segments can be specified by the user ). 

Slurry Stirring

SS316 Moving Rod

Exhaust Port Size

127mm O.D

Product   Dimensions

1620mm   ( L) x 950mm (W) x 1100mm (H)

Compressed Air

0.5-0.8 MPa (Air   compressor not included.)

Net Weight

1000 kg (2200 lbs)

Application notes

Please use Acetone to clean and dry the doctor blade, slurry feeder, and roller to avoid rusting.