Smile, Smart, Speed

고객의 만족을 위하여 최선을 다하는 기업, 정문사이언스입니다.

공정장비

HomeHOME > 회사소개 >공정장비

Wall mount oxygen transmitter

모델명 :
제품 견적문의

상품상세정보

Wall mount oxygen transmitter is small in appearance and easy to maintain. It has the imported new zirconia detector with high sensitivity, fast response, long service life and easy maintenance.

Wall mount oxygen transmitter main features:

1.The calibration interval is long, high precision, stable and reliable;

2.High-precision temperature automatic compensation system to eliminate the influence of ambient temperature;

3.A little calibration in the air can meet the measurement accuracy of the entire range;

4. Wide range power supply, Eliminate the influence of power fluctuation on analyzer.

Wall mount oxygen transmitter technical parameters:

Measuring principle

zirconia

Display mode

no display (optional external display module)

Range selectable

0 ~ 10/100/1000ppm, 1.00%, 25.00% O2

Resolution

0.1ppm

Measurement accuracy

0~1000ppm /1.00%/10.00% /25.00%≤±1% FS

0~100ppm ≤±2% FS

0~10ppm ≤±5%FS

Repeatability

 ≤±1%

Response time

 T90<15S

 Analog output

4~20mA.DC (non-isolated output, load resistance less than 500 ohms)

1 way programmable dry contact passive alarm output, contact maximum capacity 220VAC/2A

Display module interface

Communication method

 RS485

Power supply

 DC24V 1.5A

Sample gas temperature

 -10 ~ +50℃

Sampling method

 plug-in (diffusion)

Sample gas pressure

 86-106KPa, regulated atmosphere

Sample gas component

 no flammable gas, no corrosive gas, the amount of dust is less than 1mg/Nm3

Specification size

 Transmitter 75mm × 162mm × 29mm (H × W × D)

Hole size

 hole distance 151mm

Service life

 >5 years (under normal use conditions)

Gas circut interface

 Φ6 plastic tube quick screw

Installation method

transmitter wall mount, oxygen sensor probe plug-in installation