제주장학재단

Item

Specifications

Main   parameter

Model:CY-M1200-12L

 Max.Temp: 1200℃  （0-1100℃   Continuous working temperature)

Suggested   heating rate:10℃/min

Power:   220V,single-phases,6KW

Chamber   size: 300*200*200mm(D*W*H)  12L

Furnace   structure

Double layers forced air cooling structure,the temperature is less than   60℃.

Integrated compact design,stepped split joint structure,personalized   furnace door and touch screen operation more convenient and practical.

Over-temperature protection,over-current overload   protection,bias-temperature protection,burnout thermocouple   warning,temperature setting ultra-high protection,temperature program   ultafast protection.

Safety protection system: the furnace is equipped with a fuse and air   switch. When the current exceeds the rated current of the air switch, the air   switch will automatically open, effectively protecting the electric furnace.

Heating element

Nickel   chrome high-quality resistance wire (Kanthal A1 imported resistance wire can   be selected)

Temperature controlling

Temperature   accuracy: ±1℃

Yudian   programmed temperature control instrument (standard configuration)

30 segment   program temperature control intelligent PID regulation.

With   overtemperature protection and thermocouple breaking protection, the heating   circuit of the electric furnace will be cut off automatically in case of   overtemperature or thermocouple breaking (when the temperature of the   electric furnace exceeds 1200 degrees or the thermocouple is burnt out, the   AC relay on the main circuit will be cut off automatically, the main circuit   will be cut off, the ON light on the panel will be off, the OFF light will be   on, and the electric furnace will be protected limited)

It has   power failure protection function, that is, when the furnace is powered on   after power failure, the program does not start from the initial temperature,   but from the furnace temperature when power failure occurs.

The   instrument has the function of temperature self adjustment.

PID   automatic control via SCR(silicon controlled rectifier)power control with   phase angle fired,current limiting resistor.

Materials of furnace chamber

1. High   quality high-purity alumina polycrystalline fiber solidified furnace formed   by vacuum suction filtration.

2. Made   with Japanese technology.

3. The   spacing and pitch of resistance wires in the furnace are all arranged   according to Japan's mature thermal technology, and the temperature field is   simulated by thermal software

4. Three   side heating (left, right and upper) is adopted to make the temperature field   more balanced.

Packaging   information

860*630*1030MM   112KG

Warm Tips

1. For safety, please put the stove in a ventilated place.

2. In order to improve the service life of the furnace, we suggest that   the heating rate should not exceed 10 ℃/min. The cooling rate shall not exceed 5 ℃/min.

3. The furnace is not vacuum sealed, and toxic or explosive gas is   prohibited

4. It is forbidden to put the materials directly on the furnace bottom   cushion bricks. Please put the materials in the special crucible.

5. During heating, materials and crucibles shall not touch heating   elements and thermocouples.

Warranty

One year   limited warranty with lifetime support, excluding heating element,cooling   fans,thermocouple and ceramic tube damaged by user.

Attention:   Any damages caused by the use of corrosive and acidic gases, and any damage   from wrong operate and use are not under the coverage of One Year Limited   Warranty.