Smile, Smart, Speed

고객의 만족을 위하여 최선을 다하는 기업, 정문사이언스입니다.

HomeHOME > 회사소개 >

Faster battery electrode roll to roll transfer coating system

모델명 :
제품 견적문의

상품상세정보

Faster battery electrode roll to roll transfer coating system is specially used for the surface coating of foils. It adopts PLC and human-machine control system, and humanized Chinese and English switchable operation interface. The machine adopts three-roll transfer coating, which can coat the surface of the substrate with a very uniform thin coating and is automatically dried by the drying system; continuous and intermittent coating can be applied during coating.

Faster battery electrode roll to roll transfer coating system specifications:

Working Voltage

· 208 -220V,  50/60   , 3 phases, ( standard )

· 380V, 50/60 Hz, Three Phase    ( optional)

· 460V, 50/60 Hz,   Three-Phase available upon request

Max. Power Consumption

30 KW ( 100A Air breaker   required )

Coating Method

Transfer coating method   for better density and uniformity  

Max. Coating Width

400mm

Coating Speed

Max. 4 meter / minute 

Thickness Precision

± 3µm (± 5µm at edges)

Max.   Drying Temperature 

150°C

Temperature Accuracy

±1°C

Heating Zone Length

4.5 Meter (3 zones, 1.5 meters per zone)

Reeling/Unreeling Shaft

75mm (ID)

Max. Reeling/Unreeling   Diameter

250mm (OD)

Max. Coating Length
  • Depending on coating and substrate        thickness.
  • Typically, 10um thick foil with 100um        coating can get 600 meters of electrode length coated per run

Slurry Stirring

SS316 Moving Rod

Compressed Air

0.5-0.8 MPa (Air   compressor not included.)

Net Weight

1000 kg

Warranty
  • One Year limited warranty with lifetime support.
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty.