Smile, Smart, Speed

고객의 만족을 위하여 최선을 다하는 기업, 정문사이언스입니다.

HomeHOME > 회사소개 >

Multi-Function Coater

모델명 : CY-GSL-1800X-SBC2
  • - Plasma Sputtering+Evaporating+Carbon Coating with Turbo Hi-Vacuum System
제품 견적문의

상품상세정보

Product Description

This machine is a floor-stand Multi-Function Film Coater, which integrates thermal evaporating, carbon coating and plasma sputtering coating into one machine and it can provide the coating for almost every material, including metallic, semiconductive and insulating materials. It is an excellent and cost-effective coating machine for research labs.



SPECIFICATIONS   


Input Voltage220VAC, 10A, 50/60 Hz, single phase  ( < 2500W)
Input Power< 2000W  (including pump)
Output Voltage (DC)AC10V upto 100A Max. for thermal evaporationDC 3KV, 10mA for Plasma sputtering
Vacuum Chamber

Bell Jar made of pyrex glass250mm Dia. x 340mm HeightTwo inner glass tubes are included for radiation

blockingOne is 88 mm ID x 140mm H for thermal evaporating The other one is 88 mm ID x 57mm H for 

plasma sputteringOne stainless steel mesh enclosure is included for blocking light radiation during thermal evaporation

Turbo Vacuum Pump

High-speed turbo vacuum pump system is installed bottom of the coaterVacuum speed:  600L/SVacuum level:  

10e-6 torrEnvironmental working temperature:  < 32°C

Coating Source Assembling

Three sets of coating source assembling are included.                  

(1)   Dual heating station for thermal evaporating ( Pic lower left)Can evaporate two kinds of materials in same time.

Max. temperature can reach 1800ºC  to evaporate almost all kinds of materials. 

Tungsten wire resistance heaters are included for immediate use.Spare Tungsten heater is available

(2)  One set for carbon coating Assembling two carbon rods are included for immediate use

(3)  One set for DC plasma sputteringOne gold target  ( 38mm Dia x 0.12 mm thickness) is included

Control PannelControl Panel allows you choose coating method and adjust sputtering current and evaporation power
Gas atmosphereOne needle valve installed to allow Ar gas flow to achieve better plasma coating
Overall DimensionsL800mm× W560mm× H1340mm
Net Weight150 kg
Shipping Weight & Dimensions400 lbs; 52"x40"x54"
Warranty & CertificateOne years limited warranty with lifetime support
CE certified