|
Induction Heater
|
- Working Voltage: 220V AC, 50/ 60Hz, Three Phases (380VAC,
3phase available upon request)
- Working Current: 10~86 Amps (100A breaker required)
- Max. Input Power: 25 KW
- Output Frequency: 30 - 80 kHz
- Duty Cycle: 100%
- Induction Coil: 150mm(OD) x 140mm(ID) x 65mm(H)
- Air Cooling: Rear Fan
- Protection: Automatic water pressure, over temperature, and
overpower protection
- Refractory Assembling: Complete refractory assembling
made of alumina, including bottom crucible support, crucible holder, and
cover
|
|
Timer Control
|
Automatic timer control or Manual control
selectable
- Manual Control: by Foot Pedal
- Automatic Heating Time: 1-99 Seconds
- Automatic Dwell Time: 1-99 Seconds
- Automatic Cooling Time: 1-99 Seconds
|
|
Temp. Controller & Thermocouple
(optional)
|
- Precision digital temperature controller with Automatic
PID tuning
- 30 segments programmable for controlling heating
and cooling rate as well as dwell time.
- Overheating & thermocouple failure protection.
- +/- 3℃ temperature accuracy.
- +/- 3℃ temperature accuracy.
- Thermocouple: C type ( 1/4"x10"L )
- Continuous Working Temp. Range: 1000℃~1900℃
- Max. Working Temperature: 2000℃ (for less than an hour)
- Max. Heating Rate:
- 4℃/second (1000℃-1200℃)
- 3℃/second (1200℃~1500℃)
- 1℃~2℃/second (1500℃~2000℃)
|
|
Water Cooling
|
- Flowrate: >10 L/Min
- Pressure: ≥0.2 MPa (29 Psi)
- Tap water is acceptable, but using Recirculating Water
Chiller is highly recommended. Protection: Overpressure and over
temperature switch
- Water Chiller (optional)
- Temperature range: 5 - 30℃
- Water Flow Rate: > 58 L/m
- Note: It is recommended to use a specific coolant to
get the best performance.
|
|
Warranty
|
- One year limited warranty with lifetime support
- Consumable parts such as processing tube, thermocouple,
refractory liners, o-rings, and heating coil are not covered by
the warranty
|
HOME > 회사소개 > 
